Surfing is never a dull moment. The joy of the connection with the waves of the sea finds no limits. The enjoyment of surfing comes from riding the waves on a surfboard. Surfers usually surf on the sea, ocean, river, or artificial waves. They drift upon the waves until the waves lose their energy and break. It involves the skill of maintaining balance with gravity on the swells. Anybody can learn to surf. The primary lesson taught to novice surfers is how to apply surf wax on their surfing board. It is essential to use it to not slide off from the surfing board while performing the sport. Sex wax aids you to find more grip on the paddle of the board.
Australia is a dream destination for many surfers across the globe. There are about 1.7 million active surfers in Australia. It’s so popular because of the swells the islands of Australia receive from Antarctica. Such waves provide good consistency for surfing.
Surfing has a lot of physical and mental health benefits like;
- Stress relief
- Improves your cardiovascular health
- Improves your body flexibility
- Allows you to think ahead and take quick decisions
- It is a great workout to tone your muscles
- It revamps your “never give up” nature
It is essential to gain all these benefits full-fledged. For this, a surfer has to concentrate on surfing instead of the slippery feel. A good surfboard wax would do this job right.
Choose the perfect surfboard wax.
It is a boundless joy to feel the surfboard on your feet with the waves. Choosing a wax with a hardness level following the water temperature is essential.
The simple formula to choose the perfect surf wax is the hardness is proportional to the temperature. If the water temperature you will be surfing on is more, then the hardness of the wax has to be high. If you are surfing on cold water, a softer wax must do the job. One needs to check the location and the climate before you plan to surf there. This planning will let you choose the perfect sex wax as per the temperature.
- From 22 degrees centigrade and higher, one could use tropical wax.
- From 18 to 22 degrees centigrade, one could use a warm wax.
- From 14 to 18 degrees centigrade, you can use excellent polish.
- From 14 degrees centigrade and below, you may use cold wax.
What are the two layers of waxes on a surfboard?
There are two layers of wax application on the glider board. One is the basecoat, and the other is a topcoat. Whenever you apply any wax to your board, it is essential to paste the basecoat. The basecoat is a hard wax that works in tropical and warm climates.
First, apply this basecoat on your board with little bumps on the feet area. It may be a little challenging to apply this coat initially. But, once applied, they last longer than the topcoat. Use the right amount of pressure to apply these basecoats.
Then, apply the topcoat you have chosen. A little pressure is given in circular motions to apply this topcoat. When you paste the sex wax as a top coat, make sure that the bumps of the basecoat become more protruding.
What is a wax comb?
A wax comb, as the name suggests, looks like a comb. The straight-edged side of the comb finds its use to remove the wax whereas, the other side holds its functions in applying the wax on the board for more traction.
Removing the wax
It is the most disliked part of surfing. It is because it creates a lot of mess while removing. One has to remove the wax once he finds low traction. The surf wax wears off when the number of usage times increases. One method is to coat your board with sand and leave it for a few minutes.
Another method is to use heat to melt the wax. One can also use a wax comb to scrape off the wax and wipe it out with a cloth. It is prime to clean and store your surfboard in good condition for later use.
